Canivet Rabies Ab Test

Introduction

Rabies is a vital disease to both animal and human beings. Dog or cat could be a carrier without any clinical symptom. Vaccination could be apparently decrease the ratio of carrier and infection of rabies virus. But even after vaccination, there is still about 15% of total cases which could not generate protective antibodies. It is suggested to detect the Rabies antibodies for dogs after 45days vaccination.

The Canivet Rabies Ab Test is a lateral flow immunochromatographic assay for the qualitative detection of rabies virus antibody (Rabies Ab) above the level 0.5IU/mL in dog’s serum or plasma. Assay Time: 10-15 minutes

Benefits

1. One-step whole blood, serum and plasma testing.

2. Simple operation, non-professional on-site inspection.

3. The detection process is fast, and the result will be displayed in about 15 minutes.

4. The test time is less than or equal to 10 seconds, and it can detect 270 samples per hour at the fastest.

5. The detection equipment is compact, easy to carry, mobile terminal operation, cloud platform quality control.

6. The detection sensitivity is high, comparable to that of enzyme-labeled kits.

Components

• Test devices

• Droppers

• Single Buffer

• IFU

Principle

The Rabies Virus Antibody Rapid test is based on sandwich lateral flow immunochromatographic assay. The test device has a testing window for the observation of assay running and result reading. The testing window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample hole on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated recombinant antigen. If the Rabies antibodies level is above 0.5IU/mL in the specimen, a visible T line will appear. The C line should always appear after a sample is applied, which indicates a valid result.

Strage and stablity

The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the package label. DO NOT FREEZE. Do not store the test kit in direct sunlight.

Other Items

Test Procedure

- Allow all materials, including specimen and test device, recover to 15-25℃ before running the assay.

- Take out the test card from the foil pouch and place it horizontally.

- Collect 20μL of the prepared specimen (serum, plasma or whole blood) into a vial of assay buffer and mix well. Then drop 3 drops (approx. 120μL) of the diluted sample into the sample hole "S" of the test card.

- Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid.

INTERPRETATION OF ASSAY RESULT

- Positive (+): Whether the T line is clear or fuzzy, the "C" line and the region "T" line are present.

- Negative (-): Shows only the sharp C line. No T line.

- Invalid: no color lines in zone C. Whether the T line appears or not.