cPL Test Canine Panereatie Lipase Rapid Test

Introduction

cPL Test Canine Panereatie Lipase Rapid test is a lateral flow immunochromatographic assay for the qualitative detection of the canine pancreatic lipase (cPL) in dog’s serum, plasma or whole blood specimen, as an auxiliary examination of pancreatitis. Cut off: 200μg/L Assay Time: 5-10 minutes.

Benefits

1. One-step whole blood, serum and plasma testing.

2. Simple operation, non-professional on-site inspection.

3. The detection process is fast, and the result will be displayed in about 15 minutes.

4. The test time is less than or equal to 10 seconds, and it can detect 270 samples per hour at the fastest.

5. The detection equipment is compact, easy to carry, mobile terminal operation, cloud platform quality control.

6. The detection sensitivity is high, comparable to that of enzyme-labeled kits.

Components

• Test devices

• Droppers

• Single Buffer

• IFU

Principle

The Canine cPL Test is based on sandwich method lateral flow immunochromatographic assay. The test card has a testing window for the observation of assay running and result reading. The testing window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample hole on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated cPL monoclonal antibodies. If the concentration of cPL is exceeding the cutoff , a visible T line will appear. The C line should always appear after a sample is applied, which indicates a valid result. By this means, the device can accurately indicate the presence of cPL antigen in the specimen.

Strage and stablity

The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the package label. DO NOT FREEZE. Do not store the test kit in direct sunlight.

Other Items

Test Procedure

-Allow all materials, including specimen and test device, recover to 15-25℃ before running the assay.

- Take out the test card from the foil pouch and place it horizontally.

- Use the capillary dropper to suck specimen and place 1 drop (approx. 10μL) of the prepared specimen into sample hole “S” of the test card. Then drop 3 drops (approx. 90μL) of the assay buffer into the sample hole. Start the timer.

- Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid.

INTERPRETATION OF ASSAY RESULT

- Positive (+): Whether the T line is clear or fuzzy, the "C" line and the region "T" line are present.

- Negative (-): Shows only the sharp C line. No T line.

- Invalid: no color lines in zone C. Whether the T line appears or not.